6
19“ HVPS-HC Module R012 Manual | Surface Concept GmbH
2.3 General Overview
The Surface Concept 19” HVPS-HC Module R012 is a high voltage module especially designed for the
Surface Concept 19” Basic Unit, a modular supply system.
The 19” HVPS-HC Module R012 comes as a 1 channel/ 2 channel version, which provides one/two separate
high voltages with a switchable polarity (must be manually switched by the user). It also provides the
capability to float on a reference potential. Hereby each channel has its own, individual reference input. For
the 2 channel version, the both channels work absolutely independent on reference potential and output
polarity.
Depending on the maximum output voltage the 19” HVPS-HC Module R012 comes with either SHV
connectors (maximum output voltage <= 5kV) or with 10kV LEMO connectors type ERA.1S.405.CTL
(maximum output voltage > 5kV).
The device can produce lethal high voltages of up to several kV. Hazardous voltages are
present, therefore only persons with the appropriate training are allowed to carry out
the installation, adjustment and repair work.
Do not open the power supply, while it is in operation. Hazardous voltages are present.
In case that the device must be opened, turn off the device first AND pull out the power
plug.
Note
The 19” HVPS-HC Module R012 is available with different output voltages and different
maximum floating voltages. Check the specification sheet of your specific 19” HVPS-HC
Module R012 for detailed information on those parameters.
