Orion-VX1000 User Manual
29
Built-in Registrar / Proxy
Parameter
Values
Description
Enable Registrar
/ Proxy
Check-box
(Yes/No)
If this box is checked then Orion-VX1000 can be used as a registrar
for SIP clients.
REGISTER
Authenticate
Required
Check-box
(Yes/No)
“REGISTER Authenticate Required” is a check box that determines
the authentication of the managed users to Orion-VX1000.
Managed users are users that are provisioned in the system. If the
box is checked, non-managed users are not allowed to register with
the system
Authentication
Realm
String
Authentication realm of Orion-VX1000 built-in Registrar for
REGISTER digest challenge, any string can be used.
SIP Users
Used to view and manage the SIP users in the system. This function
is applicable only when Built-in Registrar / Proxy is enabled. For
more details, please refer to
SIP Users
, section
6.5.2.1 below.
Note:
SIP user number
must not
be equal to access number or
conference number defined in the system and vice versa.
Show SIP
Registrations
Used to display the system’s registered users. This function is
applicable only when Built-in Registrar / Proxy is enabled. For more
details, please refer to
Show Users
, section
6.5.2.2 below below.
NAT Traversal
MCU is behind
NAT
Check-box
(Yes/No)
States whether the MCU is behind a NAT.
MCU Public IP /
Domain Name
IP address
P public IP address or domain name, used for near-end NAT
traversal (see section
9.4.1 below).
Table
6-3: Built-in Registrar Settings
External Registrar
Parameter
Values
Description
Use External
Registrar
Check-box
(Yes/No)
If an external registrar is configured, Orion-VX1000 registers access
numbers and conference rooms to the external registrar.
Registrar IP/
Domain Name
IP address
The external registrar IP address or domain name
Registrar Port
Port
The external registrar SIP port
Use REGISTER
Authentication
Check-box
(Yes/No)
Indicates whether the registration requires authentication.
Authentication
Realm
String
The string must be equal to the configured value in the external
registrar - this value is used in 401 response to REGISTER messages.
(Authentication is supported for REGISTER only).
Table
6-4: External Registrar Settings