SureShot ACFC-10, Operation Manual

Page: 14 / 24

ACFC-10 FlavorShot • SureShot Technical Assistance Center: 1-888-777-9990 or 902-865-9602
10
LCD Display
The Liquid Crystal Display (LCD) at the top of the Button Panel shows the current
dispenser function.
Note: Not all selections are available on all models.
Display Operational Status
Select Beverage Dispenser is ready for the Beverage Type that is to be flavored
to be selected. Not available on all models.
Select Flavors Dispenser is ready for a flavor selection. Up to 3 flavors may be
selected.
Select Size Dispenser is ready for selection of cup size of beverage to be
flavored.
Press Dispense Dispenser is ready for confirmation that beverage, flavor(s) and
size selected are correct. When Dispense button is pressed,
flavor is dispensed.
Dispensing… Flavor(s) are dispensing.
Not Available No flavor cartridge is installed for that Flavor button.
Pump # Empty Flavor cartridge for that pump is empty and another must be
loaded.
Pump # Prime Newly loaded cartridge is being prepared for dispensing.
Pump # Retract Piston for that pump is retracting (returning to base).
Panel Disabled Button panel is disabled for 30 seconds.
Program Mode Not used in daily operation. Press and hold Program Mode
button to exit.
Target Adjust Changes amounts dispensed for each flavor and size.
Drink Counts Provides number of drinks dispensed for each flavor.
Language Switches the language displayed in the LCD display window.
Pumps Used by qualified personnel for servicing the dispenser.
Buttons Used by qualified personnel for servicing the dispenser.
Service Used by qualified personnel for servicing the dispenser.
Note: Once the flavor is dispensed or selections are cancelled, the LCD cycles back to
display Select Flavors or Select Beverage.
Dispenser returns to normal operating conditions after 3 seconds of inactivity.