SureShot AC6.E, Service Manual, Page: 5 / 28

5
Sugar Supplies: Storage
Ensure that sugar supplies are stored in a sealed container away from moisture so that no
clumps are added to the hopper. Sugar clumps may clog the hopper outlet and affect the accuracy of
dispense amounts.
Hopper Strainers
All AC6.E Sugar dispensers have a small stainless steel strainer at the base of the sugar
hopper. That strainer is necessary for proper operation of the dispenser and should not be removed,
except for cleaning.
Some models of AC6.E Sugar dispensers have a second, larger stainless steel strainer at the
top of the sugar hopper. That strainer is optional for general dispenser operation but it must be used
with ClumpBusters. See page 8.
NOTE: The Warranty will be null and void if the dispenser is serviced by unqualified personnel. Service
under Warranty must be approved and dispatched by A. C. Dispensing Equipment Inc. before the
service technician is dispatched. Contact the SureShot Dispensing Systems® Technical Assistance
Center at 1-888-777-9990 or 1-902-865-9602 for approval. The customer is responsible for all costs not
approved by A. C. Dispensing Equipment Inc.
2. OPERATIONS
CLEAN BEFORE FIRST USE OF THE DISPENSER
•
Make sure you clean the dispenser thoroughly. See Cleaning Instructions for the Exterior of the
Dispenser and the Dispenser Components on pages 9-10.
•
Dry thoroughly . Allow all parts of the dispenser to dry completely to prevent clumping of sugar.
Starting the Dispenser
1. To Start, plug the power cord into the proper electrical outlet. The dispenser is automatically "on"
when plugged in to an active power source.
Push one of the buttons on the front panel and you will hear the valve snap open and then close.
2. If the dispenser does not operate, check to make sure that it is plugged in and that the power source
is active. If the dispenser still does not operate, immediately call the A. C. Dispensing Equipment Inc.
Technical Assistance Center at 1-888-777-9990 or 1-902-865-9602.
Loading the Dispenser
1. To place the sugar in the hopper compartment:
- Remove the lid from the hopper compartment.
- Check the Stainless Steel Strainer(s).
Make sure the small strainer is in place at the bottom of the hopper. It is necessary for the
proper operation of the dispenser. Some dispenser models, including all dispensers with a
ClumpBuster, also have a larger Stainless Steel Strainer to be placed at the top of the
hopper. See page 8.
- Add the sugar.
- Replace the lid.
2. Hold a container under the valve and push the "small" button. Sugar will be dispensed.
Repeat with the remaining buttons. The sugar will be dispensed in amounts based on the pre-
programmed specifications of the customer company.
NOTE : Before starting dispenser, ensure all Installation instructions have been followed.