SureShot AC6.E, Service Manual, Page: 3 / 28

3
AC6.E GRANULAR SUGAR DISPENSER
IMPORTANT: Read this Manual now and retain it for future reference
The SureShot Dispensing Systems® AC6.E dispenser automatically dispenses controlled portions of
granular white sugar.
Our factory has pre-configured your dispenser to deliver sugar quantities specified by your company. To
dispense, push the appropriate button on the front of the dispenser. The sugar is contained in the
sanitary hopper compartment in the top of the dispenser.
Specifications
Capacity: 6 lbs / 2.72 kg
Weight: 15 lbs (empty dispenser)
Dimensions: L x W x H: 11” x 7” x 22¼”
Electrical Requirements
•
The power requirement is: 115 VAC, 4 Amp, 1 ph, 60 Hz.
•
The power cord is furnished with a UL-approved 3-prong attachment plug. This plug is designed
to fit a receptacle with provisions for a grounding pin. The dispenser includes a microcontroller
and must be operated on
grounded electrical wiring at all times. Failure to do so will void the
Warranty.
•
Electrical servicing must be done by a qualified technician. The Warranty will be null and void if
the dispenser is serviced by unqualified personnel.
Inspection for Damage
•
When you receive the dispenser, inspect the exterior of the shipping container for damage. Note
any damage in detail.
•
Uncrate the dispenser at once (see instructions on page 4) and examine it for damage. Report
any damage to the transportation company and file a claim for damages promptly. Do not
discard the packaging.
•
Your immediate inspection protects you against loss since A.C. Dispensing Equipment Inc. is not
responsible for damages incurred during shipment
•
Notify A.C. Dispensing Equipment Inc. No returns will be accepted without prior approval.
Obtain an authorized return number by contacting A. C. Dispensing Equipment Inc. Technical
Assistance Center at 1-888-777-9990 or 1-902-865-9602.
Safety Precautions
•
Always plug the dispenser into an approved electrical outlet.
•
The dispenser includes a microcontroller and must be operated on grounded electrical
wiring at all times.
•
Unplug the dispenser from its electrical source before servicing.
•
Do not immerse the dispenser in water.
•
Over-tightening screws may cause damage to connecting pins inside the machine.
•
Observe all safety precautions with this dispenser that you would with any electrical
appliance.