manualshive.com logo in svg

SurePoint SENTINEL, Manual, Page: 4 / 61

Share
Download
SurePoint SENTINEL Manual Download Page 4

 

 

396

-

5477Y1 Sentinel Row Control Manual

 

        ©2022 SurePoint Ag Systems              

 

     4/29/2022

 

Safety

 

A

 

  

TAKE NOTE!  THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL YOUR 
ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND THE SAFETY OF OTHERS.  
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.

 

THIS SYMBOL MEANS

 

ATTENTION!

 

BECOME ALERT!

 

YOUR SAFETY IS INVOLVED!

 

Note the use  of the signal  words DANGER, WARNING and CAUTION with the  safety messages.  The appropriate 
signal word for each has been selected using the following guidelines:

 

  

DANGER:

  Indicates an imminently hazardous situation that, if not avoided, will result in death or se-

rious  injury.    This  signal  word  is  to  be  limited  to  the  most  extreme  situations  typically  for  machine 
components which, for functional purposes, cannot be guarded.

 

  

WARNING:

  Indicates a potentially hazardous situation that, if not avoided, could result in death or 

serious  injury,  and  includes  hazards  that  are  exposed  when  guards  are  removed.    It  may  also  be 
used to alert against unsafe practices.

 

  

CAUTION:

    Indicates  a  potentially  hazardous  situation  that,  if  not  avoided,  may  result  in  minor  or 

moderate injury.  It may also be used to alert against unsafe practices.

 

  

NOTICE

 is used to address safety practices not related to personal safety.

 

SurePoint 

Ag 

Systems

Summary of Contents for SENTINEL






























































Reviews:

No comments