SureKap SK6000-BF6, Instruction Manual

Page: 22 / 67

Carla / My Documents
20
Rev. Date: 24 August 2018
“SK6000-BF6 Capper Manual-word document (master) ”
11. Cap Belt Speed: Set the belt speed to run slightly greater than the required BPM speed in
order to keep the chute sufficiently full.
12. Inlet PSI: The Inlet PSI determines the air pressure used for the Cap Reject Air Jet.
Normally, this is set at 60 PSI; however the size and weight of the cap may require
adjustment.
13. Cap Sensor Regulator PSI: The Sensor Regulator is normally set at 2.5 PSI. This is a low
pressure regulator and cannot be set higher than 10 PSI. The PSI also determines the
sensitivity of the sensor. The greater the PSI, the more sensitive the sensor becomes.
Greater pressure than 2.5 PSI may also disrupt the flow of smaller caps. (see also Cap
Sensor Height)
Low Pressure Cap Sensor Regulator