Surefire iBURNER BMS-100, Installation & Operation Manual

Page: 28 / 40

28
Power Supply Specifications
Device Specification
Battery 12VDC —13.4VDC
12 VDC Power Supply SET @ 13.4 VDC
Solar Panel / 24 Volt Input 12 VDC Solar Panel / 24 Volt DC Power Supply
Note: Current limitations: 7 amps @ 12 VDC and 3 amps @ 24 VDC
Solar Panel 75 WATT Maximum (Solar panel not tested by Intertek)
Ignition Unit Specifications
Device Specification
Ignition Unit @ In Rush 6.5 Amps
Ignition Unit @ Steady state 2.0 Amps nominal (During ignition only)
Max System Amperage 7.8 Amps / 0.6 Amps Avg.
Sensor Specifications
Device Specification
Standby Switches Dry Contact Switch (Open / Close loop)
Shutdown Switches Dry Contact Switch (Open / Close loop)
Remote On/Off Dry Contact Switch (Open / Close loop)
Note: No voltage or current should be applied to the ports above.
Battery / SureFire Igniter Wiring Requirements
16 AWG @ 10 ft,
Copper Stranded
14 AWG @ 20 ft,
Copper Stranded
12 AWG @ 30 ft,
Copper Stranded
SPECIFICATIONS