Surefire iBURNER BMS-100, Installation & Operation Manual

Page: 24 / 40

24
Ignition Process with Safety T/C (Daughter board installed)
1) Press the ON Button
2) Pre-purge - Pre-purge countdown displayed.
Green LED ON.
3) Audible Alarm - 5 second countdown displayed.
Green LED ON.
4) Igniter - 8 second countdown displayed. Green LED ON
5) Solenoid valve opens - Igniter remains on for another 5 seconds. Green LED ON.
6) Ignition is achieved and a 30 second flame proof timing begins. Pilot ignites.
Green LED ON.
7) Flame is sensed, flame proof timing countdown expires the display reads “T/C temperature val-
ue” (Status code 00). Green LED ON.
8) Thermocouple temperature is observed.
Re-Ignition Process - Flame Out
1) Once the system recognizes that no flame is sensed, the system will automatically begin the re-ignition
process.
2. Reference step 2 - 7 in the “Ignition Process Section”
Re-Ignition Process - Standby
1) System in standby. Blinking Green LED.
2) Once the System resolves the Standby issue, the system will automatically begin the re-ignition process
3)
Reference step 2- 7 in the “Ignition Process Section”
Re-Ignition Process - Shutdown
1) The System requires manual reset in the event of a shutdown
2) System in shutdown.
Blinking Red LED.
3) Once the Shutdown issue has ben resolved, press the OFF button then ON button to reset.
4)
Reference step 2 - 7 in the “Ignition Process Section”
OPERATIONS GUIDE - SEQUENCE OF OPERATION