6
Step 1. Make sure you have positioned the booster close enough to an existing
electrical outlet.
Step 2. Make sure you have sufficient cable length between proposed outside antenna
location and booster connector.
Step 3 Make sure you have sufficient cable length between proposed inside antenna
location and booster connector. Additional cable may be purchased from your dealer, if
needed.
Installation Overview
Step 1. Find the outside area that has the strongest signal.
Step 2. Install the outside antenna in the area identified in step 1.
Step 3. Install the inside antennas.
Step 4. Mount the signal booster, connect the outside and inside antenna cables to the signal booster,
and connect the booster to an AC power source.
Before You Install
FCC 27.5 (d)(4) Statement: Fixed, mobile, and portable (hand-held) stations operating in the 1710-1755 MHz band as well
as mobile and portable stations operating in the 1695-1710 MHz and 1755-1780 MHz bands are limited to 1 watt EIRP. Fixed
stations operating in the 1710-1755 MHz band are limited to a maximum antenna height of 10 meters above ground. Mobile
and portable stations operating in these bands must employ a means for limiting power to the minimum necessary for
successful communications.
Coaxial Cable
Signal Booster
Inside Antenna
Outside Antenna
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
