SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
11
1. If your indoor antenna is a dome type, mount it on the ceiling in a central location.
2. If your indoor antenna is a flat panel, install it against a wall or surface projecting the
area where you want reception. Point the antenna away from the outside antenna.
To avoid interference stay a minimum distance of 3 feet from the panel antenna.
3. Run the cable from the inside antenna to the signal booster. Connect the inside antenna
to the booster connector marked INSIDE (see page 13).
4. Hand tighten the connection.
Installing Your Hardware
Installing the SC-120W Antenna:
For best results, the antenna should be mounted in an upright position. The right angle antenna
cable connects directly to the amplifier port labeled “Inside”.
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
11