manualshive.com logo in svg

SureCall Fusion4Home Omni/Panel, User Manual

Share
Download
SureCall Fusion4Home Omni/Panel User Manual Download Page 5

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

5

Note: Fusion4Home is available in four kits that are customized to your particular 
needs. Please determine which kit you have from the following list:

Package Contents

Model

Antenna Type

SC-PolyH-72-ORA-Kit

Omni Outdoor Antenna

SC-PolyH-72-YRA-Kit

Yagi Outdoor Antenna

SC-PolyH-72-YP-Kit

Right Angle Antenna

Panel Antenna

Package Options

Model No.

Usage Coverage

1 Outdoor Omni Antenna, 1 interior right angle antenna and 50’ RG6 coax cable

SC-288W

1 Outdoor Yagi Antenna, 1 interior right angle antenna an 50’ RG6 coax cable

SC-230W

1 Outdoor Yagi Antenna, 1 interior panel antenna, 20’ and 50’ RG6 coax cable

SC-120W

For a detailed description, see Kitting Information on page 21.

SC-248W

Omni antennas are ideal  

for topographies with minimal  

obstacles, they have 360º  

reception

Designed for signal 

enhancement in 1-2

rooms

Yagi antennas are designed to 

reach carrier towers that are up  

to 30 miles away

Panel Antennas allow optimum 

reception to targeted areas

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

5

Note:

  Due to the recent change of our company name from Cellphone-Mate (CM) to SureCall (SC) we have changed the prefix on all of our antennas, cables 

and accessories from CM to SC-.

Summary of Contents for Fusion4Home Omni/Panel





















Reviews:

No comments

Brands by name

Popular brands

Load more brands