on bearing and bushing.
!
Fig 52
11.24 Disassemble rear fork (see Fig 53)
• Use
special
tools to dismount bearing of
rear
fork and
remove
isolation pad
11.24.1 Assembly
•
Assemble bearing
by applying
pressure according to the inverse disassembly steps and
apply
lubricating oil on bearing and lining.
!
Fig 53
11.25 Disassemble rear fender
assembly (
see Fig 54)
Disassemble rear fender assembly according to the following steps:
• Dismount bolts of cover plate of taillight
⑤
,
remove
cover plate, disconnect
port
of
taillight
wire
,
take out cable tie of rear fender taillight wire and disconnect wire with rear
fender
• Dismount bolts of rear fender
⑥
and
remove
rear fender assembly.
• put it
rear fender assembly
on platform, dismount
bolts of seat of taillight
⑤
and take
seat of taillight down.
• Dismount taillight
②
,
turning light
support
①
and rear license plate
④
successively.
• Dismount
turning light
③
from turning light support
①
.
11.25.1 Assembly
• Assemble rear fender assembly according to the inverse disassembly steps.
!
Fig 54
11.26 Disassemble
rear fender inner plate (
see Fig 55)
Disassemble
rear fender inner plate according
to the following steps:
• Use tools to dismount plastic screw
①
of
rear fender inner plate and
take
rear fender
