6.4.5.1Assembly
•
Assemble front
absorber
according to the inverse disassembly steps and fasten it with
the torque force of 10~12N.m.
!
Notice: it is important to fasten bolts of
absorber
alternatively and repeatedly
in order to disperse loads uniformly. Fastening the second bolt can make the
first bolt loose.
!
Fig 15
6.5 Dismount rear
absorber
and
rocker arm
(see Fig 16, 17)
Dismount rear
absorber
according to the following steps:
•
Put LIGHT BEE
QL3000DY
on platform or support plat at bottom bracket area
•
Loosen
the bolts of connector at the upper part of
absorber
②
: fix rear wheel
make
sure it not falls off
and dismount bolts. Put the
bike
on floor.
•
Loosen
the bolts of connector at the lower part of
absorber
②
•
dismount
absorber
②
•
Dismount bolts of
rocker arm
and take down connecting rod
of rocker arm
④
and
rocker
arm
⑤
.
6.5.1 Assembly
•
Assemble rear
absorber
and
rocker arm
according to the inverse disassembly steps.
Fasten M8 bolt of
absorber
with the torque force of 25-30N.m.
!
Don’t damage the paint on
rocker arm
and
bike
frame in disassembly and
assembly of
absorber
.
!
!
Fig 16 17Fig 17
