!
Fig 19
7.2.1 Assembly
•
Assemble head parts according to the inverse disassembly steps and with the following
torque values:
!
Important
notice
: fasten cover of head parts, upper connecting plate and
clamp bolts between handlebar and steering column and locking bolt of
absorber
of upper connecting plate successively.
• Fasten upper connecting plate
，
handlebar and stand pipe of steering column
using
the
M5 bolt with
torque of 8N.m.
front
absorber M16 Locking bolt
: 10-12N.m
Use special tool to pass new star nuts through the upper hole of stand pipe of steering
column.
!
Be careful when inserting star nuts. If it is at a deeper position than the
designed depth, locking bolts are not long enough to achieve proper
fastening.
!
Fig 20
8 Disassemble and assemble
handlebar
assembly (Fig 21)
Disassemble head parts of Light Bee
QL3000DY
according to the following steps:
•
Put Light Bee
QL3000DY
on support at bracket area
•
Dismount left and right rearview mirror
•
Dismount handle grips,
throttle
and switch.
Do not
damage switch line.
•
Dismount upper pump of brake (see “dismount upper pump from handle bar”)
•
Dismount locking bolts between handlebar and handlegear tube (see Fig 16), take
handle gear down
8.1.1 Assembly
•
Assemble
handlebar
assembly with the following torque and according to the inverse
disassembly steps:
• Fasten main pump of disk brake and M5 bolts between handlebar and handlebar tube
with the torque of 8-1
0
N.m.
