15
Third Phone Number.
When the LINKS module is enabled, this telephone number
will be used to back up the third land line telephone number should the land line fail
the dial tone search.
DLS (Downloading) Number.
When the LINKS module is enabled, this telephone
number will be used to download via LINKS1000 cellular.
LINKS AC Zone Type
Connect a LINKS AC TBL terminal to a hard wired panel zone. In the installers programming, define that zone
as a LINKS AC (30) zone type.
Programming Telephone Numbers
Enter the telephone number the way it would be dialed on a telephone. The total number of digits, including
dial tone searches, must not exceed 31. Note that a “D” for a dial tone search is automatically programmed
at the beginning of the telephone number.
Note: There must be a dial tone search programmed into the
telephone number for the LINKS module to operate.
When a telephone number is entered, press the [#] key to save the number in the system’s memory.
PC4010/PC4020/PC4010CF/PC4020CF Telephone Entry Options Menu
Press the [
∗
] key to enter the Telephone Entry Options Menu. Use the arrow keys to scroll through the list of
menus, and press the [
∗
] key to select the menu displayed on the keypad screen. Or, enter [0] or [1] to select
one of the menu options described below:
[0] Save
After entering a telephone number, instead of pressing the [#] key, this option may be selected to
save the number in the system’s memory.
[1] Dial Tone
Selecting this option will add a 2-second dial tone search to the telephone number. The dial
tone search will be represented by a “D” in the telephone number display. A dial tone search forces the
control panel to wait for a dial tone before dialing a telephone number.
The following PC4010/PC4020/PC4010CF/PC4020CF Menu Items are not used while programming
telephone numbers for LINKS operation. Do not select these items while programming telephone
numbers for LINKS operation, as adding pauses or the DTMF digits may result in improper dialing.
[2] Pause 2 Seconds
[4] DTMF
∗
[3] Pause 4 Seconds
[5] DTMF #
Transmission Cycle Days
Enter the number of days between test code communications. Valid entries are from
001 to 255; the default setting is 030.
Transmission Cycle Time
Enter the time of day for the test transmission. Enter the time in the 24-hour clock
format, where the first 2 digits are the hours ranging from 00 to 23, and where the
last 2 digits are the minutes ranging from 00 to 59. The default setting is 0000.
LINKS Trouble Reporting
Program Zone 1 trouble reporting code, and restoral reporting code.
PC40X0 v3.0: 00-04-04-03
PC40X0 v3.0: 00-04-04-05
PC40X0 v3.0: 00-04-04-06
PC40X0 v3.0: 00-04-04-02
