14
PC4010, PC4020, PC4010CF and PC4020CF Control Panels
NOTE: The DSC PC4010, PC4020 or PC4020CF control panel must be equipped with software version 3.2.
The maximum permissible entry delay time programmed on the panel should be 30 seconds.
LINKS Toggles
Yes:
LINKS module enabled. This selection must be enabled for the LINKS module to
operate with the PC4010/PC4020/PC4010CF/PC4020CF
No:
LINKS module disabled
Note:
Once the LINKS module is enabled, the Main PGM output is automatically
configured for LINKS operation and should not be used for any other function. The
PGM output cannot be reprogrammed until the LINKS module is deactivated.
Yes:
A test transmission is used for the LINKS module
No:
No test transmission is used for the LINKS module
Note:
The LINKS Test Transmission Code is programmed in the Reporting Code Section
[0][04][3][10].
Yes:
Zone 1 enabled for LINKS supervisory
No:
Zone 1 not enabled for LINKS supervisory
Note:
When this option is enabled, the PC4010/PC4020/PC4010CF/PC4020CF will
automatically reprogram the Zone Type and Options for Zone 1 for LINKS
Supervisory functions. When enabled, Zone 1 will be used to monitor the
LINKS module for trouble conditions. The Zone Type cannot be changed
until the LINKS Supervisory option is disabled. Note that an end-of-line
resistor
must
be used with this zone.
Yes:
Zone 2 LINKS Answer Enabled
No:
Zone 2 LINKS Answer Disabled
Note:
When this option is enabled, the PC4010/PC4020/PC4010CF/PC4020CF will
automatically reprogram the Zone Type and Options for Zone 2 for LINKS Answer
functions. When enabled, Zone 2 will be used for downloading through the LINKS
module. The Zone Type cannot be changed until the LINKS Answer option is
disabled. Note that an end-of-line resistor
must not
be used with this zone.
Enter the LINKS Module programming section by entering [
∗
][8][Installer’s
Code][0][04][4]. Program the following in the LINKS Module programming section:
LINKS Telephone Numbers
First Phone Number.
When the LINKS module is enabled, this telephone number
will be used to back up the first land line telephone number should the land line fail
the dial tone search.
Second Phone Number.
When the LINKS module is enabled, this telephone
number will be used to back up the second land line telephone number should the
land line fail the dial tone search.
PC40X0 v3.0: 00-04-04-04
PC40X0 v3.0: 00-04-04-04
PC40X0 v3.0: 00-04-04
PC40X0 v3.0: 00-04-04-00
PC40X0 v3.0: 00-04-04-01
