MAINTENANCE
The AC transformer comes with a 15 foot power cord and
is designed for use with the control valve; the transformer
should only be used in a dry location.
In the event of a power outage that is less than 24 hours,
the control valve will remember all settings and time of
day. After 24 hours, the only item that needs to be reset is
the time of day and will be indicated by the time of day
flashing. All other settings are permanently stored in the
nonvolatile memory.
If a power loss occurs that is less than 24 hours and the
time of day flashes, this indicates that the battery is
depleted. The time of day should be reset and the non-
rechargeable battery should be replaced. The battery is a 3
Volt Lithium Coin Cell type 2032 and is readily available at
most stores. To access battery location, remove front
cover.
POWER LOSS AND BATTERY REPLACEMENT
+
ERROR MESSAGE: If the word “ERROR” and a number are
alternately flashing on the display record the number and
contact the dealer for help. This indicates that the control
valve was not able to function properly.
ERROR
+
+
+
Correct
battery
orientation
When replacing the battery, align
positives and push down to fully seat.
Battery fully seated
Battery replacement
is 3 volt lithium
coin cell 2032
ERROR
1003
This appliance is manufactured from premium quality
material and assembled in safe conditions to assure
it is clean and sanitary. If installed and serviced correctly,
this appliance will not infect or contaminate your water
supply. However, as in any 'device' plumbed-in in your
water distribution system, a proliferation of bacteria
is possible, especially in case of 'stagnant water'.
Therefore this appliance is equipped with a 'days override'
feature, that will automatically rinse the resin bed
periodically, even in case of low or absence of water usage.
SANITIZING THE APPLIANCE
To retain the appearance of the appliance, simply wipe
it with a damp cloth or clean it with a mild soap solution;
never use abrasive cleaners, ammonia or solvents.
APPEARANCE
1
5
