1
1
Press the button „NEXT” to go to the next parameter. Press
the button „REGEN”, if you want to go back to the previous
parameter.
Step 6B: Service alarm - By pressing the buttons „+” or „-”
set the service alarm in days.
If you want your appliance to remind you about the
planned service works after the proper number of days
passed by, switch on the service message.
The interval is set as every 3 months (0.25). Setting the
value „1.00” causes the alarm to switch on once a year.
NOTE! The appliance must be serviced at least once a
year (this service may be payable). The service must be
done by a qualified company. In order to perform the
services, please contact the distributor from whom you
purchased your appliance.
Press the button „NEXT” to go to the next parameter. Press
the button „REGEN”, if you want to go back to the previous
parameter.
SET CLOCK
+
-
REGEN
NEXT
1.00
SET
YR
SERVICE ALARM
SET CLOCK
+
-
REGEN
NEXT
TYPE
SET
NORMAL ALARM DISPLAY
SET CLOCK
+
-
REGEN
NEXT
TYPE
SET
CUSTOM ALARM DISPLAY
Step 7: Setting the type of messages.
The alarm of messages operates in two modes:
NORMAL ALARM DISPLAY:
in this option the system will
additionally inform you with a buzzer about the planned
service.
CUSTOM ALARM DISPLAY:
in this option the system will
not additionally inform you with a buzzer about the
planned service.
With the buttons „+” and „-” you may choose the proper
mode. Press the button „NEXT” to go to the next
parameter. Press the button „REGEN”, if you want to go
back to the previous parameter.
Step 8. After choosing the proper mode of the alarm
display, the planned time schedule for the messages is
shown on the screen.
SET CLOCK
+
-
REGEN
NEXT
1.00
IN
YR
SCHEDULED SERVICE
Step 9: Alarm buzzer - By pressing the buttons „+” or „-” set
the alarm buzzer in the position ON or OFF.
3
If you set the service alarm in m or in days and you want
your appliance to inform you with a buzzer about the
planned service works, set the parameter in the position
ON.
Press the button „NEXT” to go to the next parameter. Press
the button „REGEN”, if you want to go back to the previous
parameter.
SET CLOCK
+
-
REGEN
NEXT
ON
SET
ALARM BUZZER
Step 10: Setting the time for sound message.
START-UP: SETTING THE TIME (HOUR): Set proper figure of
„hour” by pressing the buttons „+” or „-”.
Pressing the button „NEXT” causes going to the next
parameter. You can go back to the previous step anytime,
by pressing the button „REGEN”.
ELECTRONIC CONTROL PANEL
