18
Network
Server
1
Press
and authenticate with the Admin level credential.
2
Select
NETWORK
→
Server
.
3
Change the desired item.
•
Device
→
Server
: You can send a connection signal from the device to a server with the input information
directly. When you select
Server
→
Device, Server IP, Server URL
and
Server Port
cannot be entered.
•
Server IP
: Enter the IP address of the PC on which BioStar 2 is installed. Input is accepted only when
Device
→
Server
is set for
Connection Mode
.
•
Server URL
: Enter server URL instead of
Server IP
. Input is accepted only when
Device
→
Server
is set for
Connection Mode
.
•
Server Port
: Enter the port of the PC on which BioStar 2 is installed. Input is accepted only when
Device -> Server
is set for
Connection Mode
.
4
To save settings, press
OK
.
Serial Setting
1
Press
and authenticate with the Admin level credential.
2
Select
NETWORK
.
3
Change the desired item.
•
RS-485
: Select the RS-485 mode.
•
Baud Rate
: Select the desired baud rate.
4
To save settings, press
OK
.
