Chapter 7 Configuration Settings
www.supmea.com
25
Figure 42
7.4 Alarm setting interface
7.4.1 High report settings:
Set the alarm value and hysteresis difference of the high alarm relay. When
(measured value > alarm value), the normally open contact of the high alarm relay
is closed, and the normally closed contact is disconnected. When (measured
value < alarm value - hysteresis) , the normally open contact of the high report
relay is disconnected, and the normally closed contact is closed.
：
Select to set parameter data digits
：
Change data size
：
Jump to hysteresis parameter setting, save the setting parameters
：
Back to monitoring interface
：
Return to the alarm value parameter setting, return to the alarm setting
interface
Note: The unit xx and the data size are automatically switched according to the
selected sensor
Figure 43
--Alarm Setting--
1.High Alarm
2.Low Alarm
--High Alarm--
Value
Hysteresis
--Remote Setting--
1. Comm
2. Current Transmission
--Current Transmission--
--
