Chapter 7 Configuration Settings
www.supmea.com
16
7.2.2 ORP Signal Settings
7.2.2.1 Online calibration:
After entering the online calibration interface, enter the standard solution value,
put the sensor into the standard solution, wait for a while, and use the
to
complete the calibration after the measured value is stable. Before calibration, the
sensor needs to be washed with distilled water and wiped dry. After soaking in
water, put it in the calibration solution for calibration
Figure 22
7.2.2.2 Signal correction:
The measured ORP value can be corrected.
Figure 23
--Signal Setting--
1.Online Calibration
2.Signal Correction
3.Measure Param
--Signal Correction--
