manualshive.com logo in svg

Superrollo GW180, Operating And Assembly Manual

Share
Download
Superrollo GW180 Operating And Assembly Manual Download Page 6

6

EN

i

2.3  Technical Term - Definition

DIN EN 13659 

"Shutters and external Venetian blinds -  

Performance requirements including safety."

 

◆

This standard determines the performance require-

ments that externally attached shutters and blinds 

must fulfil. It also contains significant hazards with 

regard to the design, transportation, installation, 

operation and maintenance of these shutters and 

blinds.

Blinds

 

◆

Roller shutters

Obstacle detection

 

◆

If the roller shutters hit an obstacle in the DOWN ( 

t 

) 

direction, the superrollo GW180 / GW185 is switched 

off, see page 11.

Overload cut-off

 

◆

If the drive jams in the UP ( 

▲ 

) direction (for exam-

ple, due to ice), the superrollo GW180 / GW185 is 

switched off, see page 11.

End points

 

◆

An end point is defined and set for each running  

direction of the roller shutter. Once this point has 

been reached, the superrollo GW180 / GW185 switch-

es off and the roller shutter stops.

Running Time Limit - Transient Operation (KB)

 

◆

The roller shutter belt winder superrollo GW180 /  

GW185 is not designed for continuous operation. 

Transient operation defines the maximum permis-

sible running time, see page 12 /15.

Summary of Contents for GW180













































Reviews:

No comments

Brands by name

Popular brands

Load more brands