manualshive.com logo in svg

Superrollo GW180, Operating And Assembly Manual

Share
Download
Superrollo GW180 Operating And Assembly Manual Download Page 21

21

EN

10.  Mounting the wall bracket

i

Note for mounting on window frames, etc.

Weak window frames may break.

 

◆

When mounting on window frames, please check 

their structure and load capacity. Especially when 

mounting onto designs made of synthetic materials, 

the fastening screws must be screwed tight and must 

not loosen during operation.

 

◆

If required, ask your window manufacturer before 

fastening the belt winder onto a window frame made 

of synthetic materials.

1. 

Use the provided mounting holes.
Two mounting holes are required to fasten the belt  

winder. Generally, it is possible to use the existing 

mounting holes of the old belt winder to screw the 

wall brackets in place.

3. 

Drill mounting holes (only required for wall mounting).
Drill the mounting holes with a 6 mm masonry drilling 

machine and place the provided wall plugs into the 

drilled holes.

2. 

Draw on the new mounting holes.

Hold the wall bracket onto 

the desired installation 

position and draw on both 

mounting holes if new 

mounting holes need to  

be drilled.

Summary of Contents for GW180













































Reviews:

No comments

Brands by name

Popular brands

Load more brands