manualshive.com logo in svg

Superrollo GW180, Operating And Assembly Manual

Share
Download
Superrollo GW180 Operating And Assembly Manual Download Page 17

17

EN

Using the superrollo GW180 / GW185 for purposes other 

than previously mentioned is impermissible.

7.2  Improper use

i

Operating conditions

 

◆

Only operate the superrollo GW180 / GW185 in dry 

rooms.

 

◆

An easily accessible 230 V/50 Hz mains socket must 

be available at the installation site.

 

◆

The roller shutters must run up and down smoothly 

and should not stick.

 

◆

The mounting surface for the superrollo 

GW180 / GW185 must be flat.

There is a risk to life caused through short circuiting 

and electric shocks if the superrollo GW180 / GW185 

is used outside.

 

◆

Never install or operate the superrollo GW180 / GW185 

outside.

i

Only use the manufacturer's original spare parts.

 

◆

By doing so, you avoid risk of malfunctions and  

damage to your superrollo GW180 / GW185. 

 

◆

As the manufacturer, we provide no guarantee for the 

use of third-party components and accept no liability 

for consequential damage resulting from such.

 

◆

All repairs to the superrollo GW180 / GW185 must 

be undertaken by authorised customer service 

personnel.

7.1  Intended use

Summary of Contents for GW180













































Reviews:

No comments

Brands by name

Popular brands

Load more brands