manualshive.com logo in svg

Superrollo GW180, Operating And Assembly Manual

Share
Download
Superrollo GW180 Operating And Assembly Manual Download Page 36

36

EN

20.  What to do if... ?

Fault

Possible cause / solution

...  the superrollo GW180 / GW185 indicates no  

  functions?

Check the power supply incl. connecting cable and plug.

... the superrollo GW180 / GW185 fails to react at  

  the configured switching time?

a)  There may have been a power failure. Reconfigure the  

 

switching times, see page 30.

b)  The end points may not be configured. Reconfigure the  

 

end points, see page 26.

...  the indicator light (LED) is flashing?

There may have been a power failure. Reconfigure the switching  

times, see page 30.

...  the roller shutters no longer stop at the  

  configured end points?

The end points may be displaced due to elongation of the belt.  

Re-adjust the end points, see page 26.

...  the roller shutters stop as soon as the operating  

  button is released?

The end points are not configured. Configure the end points,  

see page 26.

...  the superrollo GW180 / GW185 rotates in the  

  wrong direction?

Possibly the belt is wrapped around the reel incorrectly,  

see page 23.

...  the roller shutters stop suddenly during  

  upward travel?

a)  The drive may be jammed, for example, due to the roller  

 

shutters freezing up or other obstacles.

b)  The roller shutters may not be running sufficiently smoothly.  

 

Check the roller shutters and roller shutter guides.

d)  The roller shutters may be too heavy. The maximum tractive force 

 

of the belt winder has been exceeded, see page 39.

i

Summary of Contents for GW180













































Reviews:

No comments

Brands by name

Popular brands

Load more brands