Supero X9SCV-Q, User Manual

Page: 77 / 91

Chapter 4: AMI BIOS
4-13
High – The processor is running hot. This is a ‘caution’ level since the CPU’s ‘Tem-
perature Tolerance’ has been reached (or has been exceeded) and may activate
an overheat alarm:
PCH, System, Peripheral Temperature
This feature displays the absolute system temperature (i.e., 90
o
C).
Fan 1 ~ 3 Speed
This feature displays the fan speed readings from fan interfaces (in RPM)
Vcore_CPU, VCC_SA, VCore_GFX, 5VCC, 12V, 3.3VCC, 3VSB, and VBAT
This feature displays the voltage readings for the described components.

ACPI Configuration
Use this feature to configure Advanced Configuration and Power Interface (ACPI)
power management settings for your system.
High Precision Event Timers
Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the de-
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are
Enabled and Disabled.
Suspend Mode
This setting allows you to configure the ACPI (Advanced Configuration and Power
Interface) state for your system when it is in the Suspend mode. The options are
Suspend Disabled,
S1 (POS) , and S3 (STR).
PS/2 KB/MS Wake Up
This feature is used to configure the PS/2 mouse or PS/2 keyboard wake up setting.
The options are
S1 (OS Control)
, S5 (OS Control), Force Enable and Force Disable.
S1 (OS Control) - Wake up from S1
S5 (OS Control) - Wake up from S5 and above
Force Enable - Wake up support is always ON; regardless of whether it is disabled
in the OS device manager.
Force Disable - Wake up support is always OFF; regardless of whether it is enabled
in the OS device manager.