Supero X9SCV-Q, User Manual

Page: 73 / 91

Chapter 4: AMI BIOS
4-9
Azalia Internal HDMI
Select Enabled to enable the internal HDMI CODEC (Coder-Decoder) for Azalia.
The settings are
Enabled and Disabled.

IDE/SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE Devices and displays the following items:
SATA Controller(s)
This option is used to enable or disable the built-in SATA controllers. The options
are
Enabled and Disabled.
SATA Mode Selection
This feature allows the user to select the mode under which the SATA controllers
operate. The options are
IDE, AHCI and RAID.
Aggressive LPM Support (AHCI and RAID SATA Mode)
Enables PCH to aggressively enter link power state. The options are Enabled
and Disabled .
Serial ATA Port 0~5
This feature displays the model and capacity of the detected device attached to the
port. This is informational only.

PCIe/PCI/PnP Configuration
This feature allows the user to set the PCIe/PCI/PnP configurations for the follow -
ing items:
PCI ROM Priority
In case of multiple Option ROMs (Legacy and EFI-compatible), this feature specifies
what ROM to launch. The options are Legacy ROM and EFI Compatible ROM.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32 PCI Bus Clocks,
64 PCI Bus Clocks , 96 PCI Bus Clocks, 128 PCI Bus Clocks, 160 PCI Bus Clocks,
192 PCI Bus Clocks, 224 PCI Bus Clocks and 248 PCI Bus Clocks.