Supero X9SCV-Q, User Manual

Page: 53 / 91

Chapter 2: Installation
2-27
A
USB Wake-up
A
USB Wake-Up
Use the JPUSB1 jumper to enable system
"wake-up" via a USB device. This jumper
allows you to "wake-up" the system by
pressing a key on the USB keyboard or by
clicking the USB mouse of your system.
The JPUSB1 jumper is used together with
the USB Wake-Up function in the BIOS.
Enable both the jumper and the BIOS set
-
ting to activate this function. See the table
on the right for jumper settings and jumper
connections.
Note : The default jumper setting is "Dis -
abled". When the "USB Wake-Up" function
is enabled, it will be active on all USB ports.
Please refer to Page 1-6 for the location of
JPUSB1 on the X9SCV-QV4.
USB Wake-Up
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)