Supero X9SCV-Q, User Manual

Page: 76 / 91

4-12
X9SCV-Q Motherboard Series User's Manual
Flow Control
The options are None, Hardware RTS/CTS and Software Xon/Xoff
The following are for information only and cannot be changed:
Data Bits: 8 or 7
Parity: None, Even, Odd, Mark, or Space
Stop Bits: 1 or 2

Hardware Health
Configuration
This feature allows the user to monitor Hardware Health of the system and review
the status of each item when displayed.
Fan Speed Control Mode
This feature allows the user to decide how the system controls the speed of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase for effective
system cooling. Select Full Speed to allow the onboard fans to run at full speed all
the times. Select Standard for the onboard fans to run initially at 50% in order to
balance the needs between system cooling and power saving, then automatically
adjust speed as needed by the system. This setting is recommended for regular
systems with normal hardware configurations. The options are Full Speed and
Standard .
CPU Temperature
The CPU Temperature feature will display the CPU temperature status as detected
by the BIOS.
Low – This level is considered as the ‘normal’ operating state. The CPU temperature
is well below the CPU ‘Temperature Tolerance’. The motherboard fans and CPU will
run normally as configured in the BIOS (Fan Speed Control).
User intervention: No action required.
Medium – The processor is running warmer. This is a ‘precautionary’ level and
generally means that there may be factors contributing to this condition, but the CPU
is still within its normal operating state and below the CPU ‘Temperature Tolerance’.
The motherboard fans and CPU will run normally as configured in the BIOS. The
fans may adjust to a faster speed depending on the Fan Speed Control settings.
User intervention: No action is required. However, consider checking the CPU
fans and the chassis ventilation for blockage.