2-16
X9SCE-F User’s Manual
JP18
JP17
JPWR2
I-SATA1
I-SATA3
J4
JKVM1
JPB1
JPG1
JWD1
JPME1
JPME2
JSD1
JBT1
HEARTBEAT LED
UID LED
MICRO-LP PCI-E 3.0 X8
X9SCE-F
PWR
P1-DIMMB2
P1-DIMMB1
P1-DIMMA2
P1-DIMMA1
CPU1
LED4
BIOS
JP16
UID SW
I-SATA2
I-SATA0
SW
8
Rev. 1.0a
VGA Enable
Watch Dog Enable
A
B
VGA Enable (JPG1)
JPG1 allows the user to enable the onboard
VGA connector (through the KVM port). Close
Pins 1/2 to use this function. The default set-
ting is Enabled.
VGA Enable/Disable Jumper Set-
tings (JPG1)
Both Jumpers Definition
Pins 1-2
Enabled (Default)
Pins 2-3
Disabled
Watch Dog RST/NMI Selection (JWD1)
Watch Dog (JWD1) is a system monitor that
can reboot the system when a software ap-
plication hangs. Close pins 1/2 to reset the
system if an application hangs. Close pins 2/3
to generate a non-maskable interrupt signal for
the application that hangs. See the table on the
right for jumper settings. Watch Dog must also
be enabled in the BIOS.
Watch Dog
Jumper Settings
Jumper Setting Definition
Pins 1-2
Reset
(default)
Pins 2-3
NMI
Open
Disabled
B
Image rotated 90
◦
A
