Chapter 4: AMI BIOS
4-11
CPU2 Slot3 PCI-E 3.0 x8 Link Speed/CPU2 Slot4 PCI-E 3.0 x8 Link
Speed/CPU2 Slot5 PCI-E 3.0 x8 Link Speed
Select GEN1 for the device installed on the slot specified to support PCI-Exp
Generation 1. Select GEN2 for the device installed on the slot specified to support
PCI-Exp Generation 2. Select GEN3 for the device installed on the slot specified
to support PCI-Exp Generation 3. The options are GEN1, GEN2
,
and
GEN3
.
QPI Configuration
Current QPI Link
This item displays the current status of the QPI Link.
Current QPI Frequency
This item displays the frequency of the QPI Link.
Isoc
Select Enabled to enable Isochronous support to meet QoS (Quality of Service)
requirements. This feature is especially important for virtualization technology.
The options are Enabled and
Disabled
.
QPI (Quick Path Interconnect) Link Speed Mode
Use this feature to select data transfer speed for QPI Link connections. The
options are Slow and
Fast
.
QPI Link Frequency Select
Use this feature to select the desired QPI frequency. The options are
Auto
, 6.4
GT/s, 7.2 GT/s, and 8.0 GT/s.
DIMM Configuration
This section displays the following DIMM information.
Current Memory Mode
This item displays the current memory mode.
Current Memory Speed
This item displays the current memory speed.
Mirroring (Available when supported by the motherboard)
Memory mirroring creates a duplicate copy of the data stored in the memory to
enhance data security.
