Chapter 1: Overview
1-5
X9DRD-EF Jumpers
Jumper
Description
Default Setting
JBT1
Clear CMOS
See Chapter 3
JI
2
C1/JI
2
C2
SMB to PCI-E Slots
Open (Disabled)
JPB1
BMC Enabled
Pins 1-2 (Enabled)
JPG1
VGA Enabled
Pins 1-2 (Enabled)
JPL1
GLAN1/GLAN2 Enable
Pins 1-2 (Enabled)
JWD1
Watch Dog Timer Enable
Pins 1-2 (Reset)
X9DRD-EF Connectors
Connectors
Description
COM1/COM2
Backplane COM Port1/Front Accessible COM2 Header
FAN1~8
CPU/System Fan Headers
JBAT1
Onboard Battery (See Chpt. 3 for Used Battery Disposal)
JD1
Speaker/Power LED Indicator
JF1
Front Panel Control Header
JIPMB1
4-pin External BMC I
2
C Header (for an IPMI Card)
JL1
Chassis Intrusion
JOH1
Overheat LED Indicator
JPI
2
C1
Power Supply SMBbus I
2
C Header
JPW1
24-Pin ATX Main Power Connector (Warning on Pg. 1-6.)
JPW2/3
12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
JPW4
12V 4-Pin Power Connectors (See Warning on Pg. 1-6.)
JSD1
SATA DOM (Device on Module) Power Connector
JSTBY1
+5V Standby Power Header
JTPM1
TPM (Trusted Platform Module)/Port 80
JUID
UID (Unit Identification) Switch
LAN1/LAN2
Gigabit Ethernet Ports 1/2
(IPMI) LAN
IPMI_Dedicated LAN
(I)SATA0-5
Intel SATA Connectors 0-5 from the Intel PCH
SP1
Onboard Buzzer (Internal Speaker)
( C P U 1 ) S l o t s 1 / 2 / 6 ,
(CPU2)Slot3/4/5
PCI-Express 3.0 x8 Slots (See Note Below)
(T-)SGPIO 1/2
Serial ATA (SATA) General Purpose I/O Header
(BP) USB 0/1, 2/3
Back Panel USB 0/1, 2/3
(FP) USB 4/5, USB 8/9 Front Panel Accessible USB Connections (4/5, 8/9)
JP2
Manufacture (ME) Mode
Pins 1-2 (Normal)
JPME1
ME Recovery
Pins 1-2 (Normal)
JVRMI
2
C1/
JVRMI
2
C2
CPU1/CPU2 VRM SMbus Enable
Pins 1-2 (Normal)
Note:
PCI-E slots support Low-Profile MD2 form factor for devices/add-on
cards that are shorter than 167.64mm or 6.59" (in) in length only.
