Supero X9DAX-7F, User Manual

Page: 97 / 119

Chapter 4: AMI BIOS
4-19
Load Onboard LAN1 OPROM, Load Onboard LAN2 OPROM
Select Enabled to enable the onboard LAN1/LAN2 Option ROM. This is to boot
the computer using a network device. The default setting for LAN1 Option ROM is
Enabled , and the default setting for LAN2 Option ROM is Disabled .
Load Onboard SAS OPROM
Select Enabled to enable the onboard SAS Option ROM. This is to boot the com-
puter using a SAS device. The default setting for SAS Option ROM is
Enabled .
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are
Onboard , and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and
Disabled
.

Serial Port Console Redirection
COM 1
These two submenus allow the user to configure the following Console Redirection
settings for a COM Port specified by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are
Enabled and Disabled .

Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data
with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are
ANSI, VT100, VT100+ , and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the