Supero X9DAX-7F, User Manual

Page: 13 / 119

Chapter 1: Overview
1-5
X9DAX-iF/-7F/-iTF/-7TF Jumpers
Jumper
Description Default Setting
J19
BIOS Chip Select
Pins 1-2 (Primary BIOS
Chip Select)
J29/J30
SMB Enable Pins 1-2 (Enabled)
JCMOS1
Clear CMOS Open (Normal)
JI
I2
C1/JI
I2
C2 SMBus to PCI-E Slots Pins 2-3 (Normal)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPI1 IEEE1394a Enable Pins 1-2 (Enabled)
JPLAN1 (X9DAX-iF/7F) Gigabit Ethernet LAN Enable Pins 1-2 (Enabled)
JPLAN1 (X9DAX-
iTF/7TF)
10G Ehernet LAN Enable Pins 1-2 (Enabled)
JPME1 Management Engine (ME) Recovery Mode
Engine
Pins 1-2 (Normal)
JPME2 Manufacture Mode Select Pins 1-2 (Normal)
JPS1 (X9DAX-7F/-7TF) SAS Enable Pins 1-2 (Enabled)
JWD1 Watch Dog Pins 1-2 (Reset)
X9DAX-iF/-7F/-iTF/-7TF Connectors
Connectors Description
(J) Audio 8 Channel (7.1) High-Definition Backplane Audio Connector
(FP) Audio Front Panel Audio Header (J18)
Battery Onboard CMOS Battery (See Chpt. 3 for Used Battery Disposal) (BT1)
CNF1/CNF2 IEEE 1394a 1/2 Connectors
(J) COM2 Front_Panel Accessible COM Port Header
FAN1~8 CPU/System Fan Headers (Fan7/Fan8: CPU 1/2 Fans)
JD1 Speaker/Power LED Indicator
JF1 Front Panel Control Header
JL1 Chassis Intrusion
JOH1 Overheat/Fan Fail LED Indicator
JPI
I2
C1 Power Supply SMBbus I
2
C Header
JPW1 24-Pin 24-Pin Power Connectors (See Warning on Pg. 1-6.)
JPW2/JPW3 12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
JS3 Battery Backup Unit (BBU) Connector (For X9DAX-7F/7TF)
JSD1 SATA DOM (Device_On_Module) Power Connector
JSPDIF_In SPDIF_(Sony/Philips Digital Interface)_In Header
JSPDIF_Out SPDIF_(Sony/Philips Digital Interface)_Out Header