Supero X9DAX-7F, User Manual

Page: 103 / 119

Chapter 4: AMI BIOS
4-25
Memory Voltage
Use this feature to override the Memory Voltage settings specified by the manufac -
turer. The VID+Offset options range from 0m Volts to 310m Volts.
DDR Speed
Use this feature to force a DDR3 memory module to run at a frequency other than
what is specified by the manufacturer. The options are
Auto
, Force DDR3-800,
Force DDR3-1066, Force DDR3-1333, Force DDR3-1600, Force DDR3 1866, and
Force SPD.
tCL, tRCD, tRP
Use the above items to set the tCL (Cas Latency), tRCD (Row to Col Delay), and
Ras Precharge values. The options are
Auto , 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, and 18.
tRAS
Use this item to set the Ras Active Time value. The options are Auto, 12, 13, 14,
15, 16, 17, and 18.
tRRD
Use this item to set the minimum tRDD (Row Active to Row Active Delay) value.
The options are
Auto
, 19, 23, 27, 32, 36, and 41.
tRRD
Use this item to set the minimum tRDD (Row Active to Row Active Delay) value.
The options are
Auto , 4, 5, 6, 7, and 8.
tWR
Use this item to set the minimum tWR (Write Recovery) time. The options are Auto ,
3, 4, 5, 6, 7, and 8.
tRTP
Use this item to set the minimum internal tRTP (Read to Precharge) command delay
time. The options are
Auto , 3, 4, 5, 6, 7 , and 8.