2-6
X6DH8-G/X6DHE-G User's Manual
2-3
Installing DIMMs
(*
Note:
Check the Supermicro web site for recommended memory modules:
http://www.supermicro.com/TECHSUPPORT/FAQs/Memory_vendors.htm)
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage. Also note that the
memory is interleaved to improve performance (see step 1).
DIMM Installation (See Figure 2-2 on Page 2-6)
1. Insert the desired number of DIMMs into the memory slots, starting with
Bank 1. The memory scheme is interleaved so you must install two
modules at a time, beginning with Bank 1, then Bank 2, and so on.
2. Insert each DIMM module vertically into its slot. Pay attention to the
notch along the bottom of the module to prevent inserting the DIMM
module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the
slot. Repeat for all modules (see step 1 above).
Memory Support
The X6DH8-G/X6DHE-G supports up to 16/32 GB Registered ECC DDR 333/
266 (PC2700/PC2100) memory. All motherboards were designed to support
2GB (DDR333)/4GB (DDR 266) modules in each slot, but has only been
verified for up to 1 GB modules.
DDR333 Memory Support
The X6DH8-G/X6DHE-G supports up to 4 Double-Bank or 6 Single-Bank
DDR333 memory modules.
