Supero X10SAE, User Manual

Page: 90 / 113

4-24
X10SAE User’s Manual
•
VDIMM
•
5Vcc
•
PCH 1.05V
•
AVCC
•
3.3Vcc
•
VSB
•
VBAT

Serial Port Console Redirection
COM1/COM2
Use this feature to enable console redirection for COM1 and COM2 ports. The op-
tions are Enabled and Disabled. The default setting is
Disabled .

Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data
with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are
ANSI, VT100, VT100+ , and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy
lines. The options are 9600, 19200, 38400, 57600 and
115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The
options are 7 Bits and
8 Bits .