Supero X10SAE, User Manual

Page: 88 / 113

4-22
X10SAE User’s Manual

Firmware Update Configuration
ME FW Image Re-Flash
Select Enable to re-flash the ME (Management Engine) Firmware. The options are
Disable and Enable.

AMT (Active Management Technology) Configuration
Intel AMT
Select Enabled to use Intel Active Management Technology (AMT) to enhance
system performance. The options are
Enabled and Disabled.
Activate Remote Assistance Process
Select Enabled for Remote Assistance support, which can trigger CIRA boot, allow-
ing the system to boot via Client-Initiated Remote Access. The options are Enabled
and
Disabled .
AMT CIRA Timeout
This feature allows the user to set the Client-Initiated Remote Access (CIRA)
Timeout setting. The default setting is
0 .
BIOS Hotkey Pressed
Select Enabled to use the BIOS Hotkey feature. The options are Enabled and
Disabled .
Watch Dog Timer
Select Enabled to allow AMT (Advanced Management Technology) to reset or power
down the system if the operating system or BIOS hangs or crashes. The options
are
Disabled , and Enabled.
OS Timer / BIOS Timer
These options appear if Watch Dog Timer (above) is enabled. This is a timed
delay in seconds, before a system power down or reset after a BIOS or operating
system failure is detected. Directly enter the value in seconds.

Super IO Configuration
Super IO Chip NCT6776F
 Serial Port 1 Configuration /Serial Port 2 Configuration
Select Enabled to enable the onboard serial port. The options are Enabled
and Disabled.