4-10
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
CPU T State Control (Available when Power Technology
is set to Custom)
ACPI (Advanced Configuration Power Interface) T-States
Select Enable to support CPU throttling by the operating system to reduce power
consumption. The options are
Enable
and Disable.
Socket RAPL (Running Average Power Limit) Configuration
FAST_RAPL_NSTRIKE_PL2_DUTY_CYCLE
This feature displays the value of the item above the NSTRIKE_PL2-duty-cycle
.
The value should be within the range between 25 (10%) and 64 (25%). The
default setting is
64
.
Turbo Power Limit Lock
Select Enable to set the power use limit for the machine when it is running in
the turbo mode. The options are Enable and
Disable
.
Long Power Limit Override
Select Enable to support long-term power limit override. If this feature is disabled,
BIOS will set the default value. The options are
Enable
and Disable.
Long Duration Power Limit
This item displays the power limit set by the user during which long duration
power is maintained. The default setting is
0
.
Long Duration Time Window
Use this item to set the value (in seconds) of the Long-Duration time window
during which long duration power is maintained. The default setting is
10
.
Package Clamping Limit1
Use this item to set the limit on power performance states for the runtime proces-
sor, with P0 being the state with the highest frequency (clock speed) and power
(consumption), and P1, a step lower in performance than P0, with its frequency
and voltage scaled back a notch. The options are Between P1/P0 and
Below P1
.
Short Duration Power Limit Enable
Select Enable to support Short Duration Power Limit (Power Limit 2). The options
are
Enable
and Disable.
