1-8
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
IPMI 2.0
•
IPMI 2.0 supported by the ASpeed 2400 BMC
Serial (COM) Port
•
One (1) Fast UART 16550 Connection: 9-pin RS-
232 port
VGA
•
Rear VGA Port
Peripheral
Devices
USB Devices
•
Two (2) USB 3.0 ports on the rear I/O panel (USB0/
USB1)
BIOS
•
16 MB AMI SPI BIOS Flash ROM
•
DMI/DMI2 2.3, PCI 2.3, ACPI 2.0/3.0/4.0, USB Key-
board, Plug & Play (PnP), UEFI 2.3.1, and SMBIOS
2.7 or later
Power
•
ACPI Power Management
Config.
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager (available
when the Supermicro Power Manager [SPM] is
installed)
•
Management Engine
•
Riser Card auto-detection
System
Health
System Health Monitoring
Monitoring
•
Onboard system health monitors for 1.2V, +3.3V,
3.3V Standby, +5V, +5V Standby, +12, chipset
(PCH) voltage, memory voltage, BMC voltage, and
battery voltage.
•
CPU 6-Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Fan status monitoring with firmware 4-pin fan speed
control
•
Low noise fan speed control
LED Indicators
•
System/CPU Overheat LED
