Supero SuperWorkstation 5037A-IL, User Manual

Page: 92 / 121

Chapter 7: AMI BIOS
7-5
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are
Enabled
and Disabled.

Power Configuration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and
Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed.
Select 4_Seconds_Override for the user to power off the system after pressing and
holding the power button for 4 seconds or longer. Select Instant Off to instantly
power off the system as soon as the user presses the power button. The options
are 4 Second Override and
Instant Off.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system
to resume its last power state before a power loss. The options are Power-On,
Power-Off
and Last State .
Deep Sx Power Policies
Select Enabled to enable Deep Sleep State support. The settings are Enabled and
Disabled.

Processor & Clock Options
Warning : Take Caution when changing the Advanced settings. An incorrect value,
a very high DRAM frequency or an incorrect DRAM timing setting may cause sys-
tem to become unstable. When this occurs, revert to the setting to its manufacture
default setting.
Clock Spread Spectrum
If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused
by the components and will attempt to decrease the interference whenever needed.
The options are Enabled and
Disabled
.