Supero SuperWorkstation 5037A-IL, User Manual

Page: 77 / 121

6-4
S
uper
W
orkstation 5037A-IL User's Manual
6-4 Removing and Installing 3.5" Hard Drives
The SC732 chassis must be powered-down before hard drives can be removed
from the hard drive carriers.
Removing and Installing 3.5" Hard Drives
1. Power down the server and remove the power cord from the rear of the
power supply.
2. Remove the side cover as described on page 6-2.
3. Disconnect all of the cables from the hard drive.
4. Rotate the hard drive cage outward 90 degrees as described on page 6-3.
5. Press the release tab on the side of the hard drive carrier that is to be re-
moved from the hard drive cage.
6. Gently slide the hard drive carrier out of the hard drive cage.
7. If a hard drive is already present, remove it by carefully pulling the sides of
the hard drive carrier outward.
Figure 6-3. Removing a Hard Drive Carrier from the Hard Drive Cage
1
6
Release Tabs
1
5