Supero SuperWorkstation 5037A-IL, User Manual

Page: 76 / 121

Chapter 6: Advanced Chassis Setup
6-3
Figure 6-2. Rotating the Hard Drive Cage
6-3 Rotating the Hard Drive Cage
In order to access and install components in the chassis interior, it is necessary
to rotate the hard drive cage (B). This will provide sufficient room to install and
configure the chassis components.
Rotating the Hard Drive Cage
1. Power down the server, remove the power cord from the rear of the power
supply.
2. Remove the side cover. (See page 6-2).
3. Lift the release tab (A).
4. Rotate the hard disk drive cage (B) outward.
Release Tab (A)
HDD Cage (B)
2
3
1
4