Supero SuperWorkstation 5037A-IL, User Manual

Page: 67 / 121

Chapter 5: Advanced Serverboard Setup
5-27
USB Wake-Up (JPUSB1/JUSB2)
Use the JPUSB jumpers to enable system
"wake-up" via a USB device. These jump-
ers allow you to "wake-up" the system by
pressing a key on the USB keyboard or by
clicking the USB mouse of your system.
The JPUSB jumpers are used together with
the USB Wake-Up function in the BIOS.
Enable both the jumper and the BIOS set-
ting to activate this function. See the table
on the right for jumper settings and jumper
connections. Use JUSB1 for back panel
USB ports and JUSB2 for front panel USB
headers/ports.
USB Wake-Up
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)