Supero SuperWorkstation 5035G-T, User Manual

Page: 70 / 108

7-6
S
UPER
W
ORKSTATION 5035G-T User's Manual
7-4.2 Advanced Chipset Control
Be careful when changing the Advanced Chipset settings. Incorrect values entered
may cause a system malfunction. Also, a very high DRAM frequency or incorrect
DRAM timing may cause system instability. When this occurs, revert to the default
setting.
DRAM Timing Select
This setting allows you to set the DRAM timing. The options are Manual and
By SPD .
DRAM Data Integrity Mode
This setting allows you to set the Data Integrity Mode for DRAM slots. The
options are Non-ECC and ECC .
PEG Force X1
Enable this option to force the PCI-E x16 slot to function as a PCI-E x1 slot.
The options are Disabled and Enabled.
SATA Mode
This setting allows you to select the Serial ATA mode for the system. The options
are IDE, RAID and APCI.
On-Chip Serial ATA
Select Disabled to disable the SATA Controller. Select Auto to allow the BIOS
to make arrangements automatically. Select Combined Mode to use the PATA
and SATA Combined Mode. A maximum of two IDE drives in each channel is
allowed. Select Enhanced Mode to enable both SATA and PATA. This mode
will support up to six IDE drives. Select SATA Only to allow SATA to operate
in Legacy Mode.
PATA IDE Mode
This feature allows you to select the channel for the PATA IDE mode. The options
are Primary and Secondary.
SATA Port
This feature allows you to set the mode for SATA ports. The default setting is
"P1, P3 is Secondary."
AC97 Auto Select
This feature allows the user to select AC97 functions. The options are Auto,
AC97 Audio Only, AC97 Modem Only and All Disabled.