Supero SuperWorkstation 5035G-T, User Manual

Page: 63 / 108

Chapter 6: Advanced Chassis Setup
6-11
6-5 Power Supply
The 5035G-T has a single 450W power supply that features noise-suppression
technology for silent operation. The power supply has the capability to automati-
cally sense and operate at 100 or 240V AC. This power supply also has the PFC
(Power Factor Correction) feature built in.
Replacing the Power Supply
1. Accessing the power supply
After powering down the system, you’ll need to remove the left chassis cover to
access the power supply for removal.
2. Removing the power supply
First, unplug the power cord from the power supply. Then remove the power supply
connectors going to the motherboard and the SATA backplane. Finally, remove the
screws that secure the unit to the mounting brackets in the chassis and then pull
the unit completely out.
3. Installing a new power supply module
Replace the failed unit with another unit having the exact same part number (PWS-
0045). Gently but fi rmly push the new unit all the way into the open bay. Secure
it to the mounting brackets in the chassis with the screws provided. Connect two
power cables to the SATA backplane and two to the motherboard (ATX PWR CONN
and J21 connectors). Finish by replacing the chassis left cover and then restoring
power to the system.