manualshive.com logo in svg

Supero SuperServer 7046T-H6R, User Manual

Share
Download
Supero SuperServer 7046T-H6R User Manual Download Page 9

Chapter 1 

Introduction

1-1 Overview

The SuperServer 7046T-H6R/7046T-H6RF is a high-end server comprised of 

two main subsystems: the SC745TQ-R800B server chassis and the X8DTH-6/

X8DTH-6F dual processor serverboard. Please refer to our web site for informa-

tion on operating systems that have been certifi ed for use with the system (www.

supermicro.com).

In addition to the serverboard and chassis, various hardware components have 

been included with the 7046T-H6R/7046T-H6RF, as listed below:

Two passive heatsinks (SNK-P0038P)

• 

Three 8-cm chassis fans (FAN-0074L4)

• 

Two exhaust fans (FAN-0082L4)

• 

One air shroud (MCP-310-48001-0N)

• 

SATA 

Accessories 

      

• 

One SATA backplane (CSE-SAS-743TQ)   

 

 

 

One iPass to SATA cable (CBL-0118L-02)  

 

 

 

Two 40-cm SGPIO cables (CBL-0157L) 

 

 

 

 

Eight drive carriers (CSE-PT17-B)

One rackmount kit, optional (CSE-PT26)

• 

One CD containing drivers and utilities

• 

SuperServer 7046T-H6R/7046T-H6RF User's Manual

• 

Chapter 1: Introduction

1-1

Summary of Contents for SuperServer 7046T-H6R







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands