manualshive.com logo in svg

Supero SuperServer 7046T-H6R, User Manual

Share
Download
Supero SuperServer 7046T-H6R User Manual Download Page 53

Chapter 5: Advanced Serverboard Setup

5-21

SAS Error LED

A SAS Error LED is located at DP7. 

When DP7 is on, an error has oc-

curred with the SAS connection.

SAS Heartbeat LED

A SAS Heartbeat LED is located at 

DP6. When DP6 is on, SAS is func-

tioning normally.

SAS Activity LED

A SAS Activity LED is located at LED5. 

When LED5 is on, SAS is active.

5-12  SAS and SATA Ports

SATA Ports

There are no jumpers to confi gure 

the onboard SATA connectors. See 

the table on the right for SATA port 

pin defi nitions.

SAS Ports

See the table on the right for the SAS 

port pin defi nitions.

SATA Port

Pin Defi nitions

Pin #             Defi nition     

1

Ground

2

TXP

3

TXN

4

Ground

5

RXN

6

RXP

7

Ground

SAS Port

Pin Defi nitions

Pin #             Defi nition     

1

Ground

2

TXP

3

TXN

4

Ground

5

RXN

6

RXP

7

Ground

Summary of Contents for SuperServer 7046T-H6R







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands