5-10
S
UPER
S
ERVER 7046T-H6R/7046T-H6RF User's Manual
5-7 Installing PCI Expansion Cards
The 7046T-H6R/7046T-H6RF can accommodate standard size add-on cards in-
stalled into all of the slots on the X8DTH-6/X8DTH-6F serverboard.
Installing an Add-on Card
Begin by removing the shield for the PCI slot you wish to populate.
1.
Fully seat the card into the slot, pushing down with your thumbs evenly on
2.
both sides of the card.
Finish by using a screw to secure the top of the card shield to the chassis.
3.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
Note
: Due to OS limitations, some operating systems may not show more than 4
GB of memory.
Note
: Due to memory allocation to system devices, the amount of memory that
remains available for operational use will be reduced when 4 GB of RAM is used.
The reduction in memory availability is disproportional. (See the following Memory
Availability Table.)
Possible System Memory Allocation & Availability
System Device
Size
Physical Memory
Remaining (-Available) (4 GB Total System
Memory)
Firmware Hub fl ash memory (System
BIOS)
1 MB
3.99 GB
Local APIC
4 KB
3.99 GB
Area Reserved for the chipset
2 MB
3.99 GB
I/O APIC (4 Kbytes)
4 KB
3.99 GB
PCI Enumeration Area 1
256 MB
3.76 GB
PCI Express (256 MB)
256 MB
3.51 GB
PCI Enumeration Area 2 (if needed)
-Aligned on 256-MB boundary-
512 MB
3.01 GB
VGA Memory
16 MB
2.85 GB
TSEG
1 MB
2.84 GB
Memory available for the OS & other
applications
2.84 GB
Summary of Contents for SuperServer 7046T-H6R
